Enhance 90W Micro ATX PS-SFX-1209F opened up.
Short power leads. Temp install prefit.
Notches to hold circuit board. Cuts for PS fan in rear.
Notch in bottom case for fan. Fan prefit.
PS power leads to be desoldered.
Desoldered leads. Hole for power cord plug.
Notches on inside for plug. Plug temp install.
Power plug fit and install.
New leads soldered on to plug and circuit board.
Rear middle case mount cut off. Cut screws and mounts prefit.
Rear screw and mount. Screw mounts Epoxied.
Rear screw mount Epoxied. Half of plastic sheet that came with the PS.
Rear screw and grounding strap in place. Circuit board away from screws.
Fan premount. Fan wires extended.
Other half of plastic sheet notched for CPU fan and wires. Teflon added.
Fan wire routing. Fan mounted with tiny black screws.
Fan wires 'hot glued' to keep away from screw. Barely visible screws for top.